Release Date
2025/11/18
Remark
1. Please use Godox firmware upgrade software G3 V1.1 or later to open this firmware file to proceed with the upgrade. G3 can be downloaded on the official website.
2. How to check the version number:After the device is powered on, go to the menu page and find the device information at the very end. You can see the software version number ( e.g. Version 1.00: V1.00 ).
3. iT32 upgrade instructions: Method 1.After powering on the device, enter the menu, find the device information, connect the computer via a USB cable, and then click on firmware upgrade. Method 2.In the powered-off state, press and hold the SET button, then insert the USB interface to connect to the computer and proceed with the upgrade.
4. X5 upgrade instructions: Mount X5 on the powered-off iT32, press and hold the power switch button of iT32 to turn it on, X5 will automatically upgrade if it’s not the latest version.
2. How to check the version number:After the device is powered on, go to the menu page and find the device information at the very end. You can see the software version number ( e.g. Version 1.00: V1.00 ).
3. iT32 upgrade instructions: Method 1.After powering on the device, enter the menu, find the device information, connect the computer via a USB cable, and then click on firmware upgrade. Method 2.In the powered-off state, press and hold the SET button, then insert the USB interface to connect to the computer and proceed with the upgrade.
4. X5 upgrade instructions: Mount X5 on the powered-off iT32, press and hold the power switch button of iT32 to turn it on, X5 will automatically upgrade if it’s not the latest version.
Updated Contents
1. Fixed an issue where the X5C's wireless triggering receiver flash would overexpose on certain Canon cameras that support optical wireless.
2. Fixed an issue where the X5S occasionally failed to control the receiver flash after waking up.
3. Fixed an issue where the X5O failed to enter sleep mode