Flash-GODOX Photo Equipment Co.,Ltd.

V1P Firmware V1.2

Release Date

2020/09/04

Remark

Before updating this firmware version, please make sure that your gear has download the G3 firmware launcher installer.

Updated Contents

1.To add the lock function by pressing the MODE button for 2 seconds.

2.To replace the display sign “Slave” with “RX”.

V100C Firmware V1.11

Release Date

2025/12/08

Remark

1. Please update the firmware with Godox firmware update software Godox G3 version 1.1 or later, which can be downloaded from the official Godox website.
2. How to check the version number:After the device is powered on, go to the menu page and find the device information at the very end. You can see the software version number ( e.g. Version 1.00: V1.00 ).

Updated Contents

1.New Features: SU-1 switch power-off memory; screen lock power-off memory; support disabling power-on lock in the menu(no unlock required on startup).

2.Optimize Bounce Flash TTL.

V100N Firmware V1.04

Release Date

2025/12/08

Remark

1. Please update the firmware with Godox firmware update software G3 V1.1. G3 V1.1 can be downloaded on the official website.
2. How to check the version number:After the device is powered on, go to the menu page and find the device information at the very end. You can see the software version number ( e.g. Version 1.00: V1.00 ).

Updated Contents

1.New Features: SU-1 switch power-off memory; screen lock power-off memory; support disabling power-on lock in the menu (no unlock required on startup).

2.Fix the issue where the effective distance display is incorrect when ISO is less than 100.

V100S Firmware V1.06

Release Date

2025/12/08

Remark

1. Please update the firmware with Godox firmware update software Godox G3 version 1.1 or later, which can be downloaded from the official Godox website.
2. How to check the version number:After the device is powered on, go to the menu page and find the device information at the very end. You can see the software version number ( e.g. Version 1.00: V1.00 ).

Updated Contents

New Features: SU-1 switch power-off memory; screen lock power-off memory; support disabling power-on lock in the menu (no unlock required on startup).

V100F Firmware V1.03

Release Date

2025/12/08

Remark

1. Please update the firmware with Godox firmware update software Godox G3 version 1.1 or later, which can be downloaded from the official Godox website.
2. How to check the version number:After the device is powered on, go to the menu page and find the device information at the very end. You can see the software version number ( e.g. Version 1.00: V1.00 ).

Updated Contents

New Features: SU-1 switch power-off memory; screen lock power-off memory; support disabling power-on lock in the menu (no unlock required on startup).