1.Added Feature: User-Settable RF ID. Procedure: Power on the receiver by simultaneously holding down the CH and GR buttons. Enter the RF ID setting interface. Short or long press the CH button to increase the ID value; short or long press the GR button to decrease the ID value. After 5 seconds, power off the receiver to save the set ID value. Upon normal startup, the set ID value will affect RF reception.

2.Fixed some minor issues.

1. To match the update of Godox flash APP.

1. To match the update of Godox flash APP.

This version is compatible with X2T-C Trigger, which has a Z01 marking on the outer casing ( near the USB port or on the battery cover) or has a sticker marking Z01 near the USB port. 

1.Fixed the issue where the trigger was not functioning properly when used with Nikon Z9 and Z6III cameras.

2.Fixed minor issues.

1.Fixed the issue where the trigger was not functioning properly when used with Nikon Z9 and Z6III cameras. 

2.Fixed the issue in multi-flash mode where the shutter speed was not restricted. 

3.Fixed minor issues.